torque-wrench-settings

Corsa 2006 – 2010

Torque Wrench Settings for Vauxhall Corsa models 2006 through to 2010.

This includes engines Z12XEP

All Torque Wrench Settings are given in good faith, no responsibility can be taken for any damage caused my incorrect values.  All values have been checked against at least one or more of the following possible sources (except where stated in the notes section)

  • Original Manufacturer
  • 3rd party repair manuals
  • Part supplier (eg, head gasket manufacturer)

 

Part(Nm)(ft lbs)Additional tighteningNotes
Air conditioning compressor to cylinder block20
Auxiliary drive belt tensioner to cylinder block (M8 bolt)20
Auxiliary drive belt tensioner to cylinder block (M10 bolt)55
Big end bearing cap bolts13 + 60º + 15º
Cam shaft bearing caps8
Camshaft sprocket bolt50 + 60ºuse new bolts
Catalytic converter support bracket bolts20
Catalytic converter to manifold35
Coolant / water pump bolts8
Coolant / water pump pump pulley bolts20
Crankshaft pulley hub-to-crankshaft bolt150 + 45ºuse new bolts
Cylinder block base plate to cylinder block (M6)10 + 60ºuse new bolts
Cylinder block base plate to cylinder block (M8)25 + 60ºuse new bolts
Cylinder block closure bolt (for TDC tool)60
Cylinder head bolts25 + 60º + 60º + 60º (4 stages)use new bolts
Drive plate bolts60use new bolts
Engine mountings: (Left hand) Mounting to body bolts80
Engine mountings: (Left hand) mount bracket to transmission bracket80 + 45º
Engine mountings: (Left hand) transmission bracket to transmission80
Engine mountings: Rear mounting /torque link80 + 45ºuse new bolts
Engine mountings: Rear mounting /torque link bracket to transmission80 + 45ºuse new bolts
Engine mountings: (Right hand) engine bracket to engine bolts60
Engine mountings: (Right hand) mounting to body bolts60
Engine mountings: (Right hand) mounting to engine bracket bolts80 + 45º
Engine to transmission bolts60
Exhaust manifold securing nuts 1.0L & 1.2L 20
Exhaust manifold securing nuts 1.4L 15
Flywheel bolts35 + 30º
Front sub-frame90 + 45º + 15ºuse new bolts
Fuel feed and return hose unions15
Inlet manifold support bracket to cylinder block20
Oil filter housing cap to filter housing10
Oil filter housing to cylinder block20
Sump (oil pan) to cylinder block base plate timing cover10
Sump (oil pan) to transmission40
Timing chain tension rail pivot bolt20
Timing chain tensioner closure bolt (for locking pin access)50
Timing cover bolts M1035
Timing cover bolts M68
Timing cover oil fill channel closure plug50

Leave a Reply

avatar
  Subscribe  
Notify of